Vca Alarm; Face Detection - Grundig GD-RT-AC3016N User Manual

10. VCA Alarm

The DVR can receive the VCA alarm (line crossing detection, intrusion detection, sudden
scene change detection and audio exception detection) sent by analog camera, and the
VCA detection must be enabled and configured on the camera settings interface first. All
other VCA detection features must be supported by the connected IP camera.
Note:
 GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N support
line crossing detection and intrusion detection of all channels, and 2-ch sudden
scene change detection. Channels with audio support audio exception detection.
 GD-RT-AC3004N and GD-RT-AC3016N series support 4-ch line crossing detection
and intrusion detection. GD-RT-AC3016N series also support 1-ch sudden scene
change detection. Channels with audio support audio exception detection.
 For the analog channels, the line crossing detection and intrusion detection conflict
with other VCA detection such as sudden scene change detection, face detection
and vehicle detection. You can only enable one function.

10.1 Face Detection

Face detection function detects the face appears in the surveillance scene, and some
certain actions can be taken when the alarm is triggered.
Step 1 Go to Menu > Camera > VCA.
Step 2 Select the camera to configure the VCA.
You can check the checkbox of Save VCA Picture to save the captured pictures of
VCA detection.
135