Getting Started; Starting Up And Shutting Down The Dvr - Grundig GD-RT-AC3016N User Manual

2. Getting Started

2.1 Starting Up and Shutting Down the DVR

Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before you start
Check that the voltage of the extra power supply is the same with the DVR's requirement,
and the ground connection is working properly.
Starting up the DVR:
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY
recommended that an Uninterruptible Power Supply (UPS) be used in conjunction
with the device.
Step 2 Turn on the power switch on the rear panel, and the Power indicator LED should turn
on indicating that the unit begins to start up.
Step 3 After startup, the Power indicator LED remains on.
Shutting down the DVR:
Step 1 Go to Menu > Shutdown.
Step 2 Click Shutdown.
Step 3 Click Yes.
Step 4 Turn off the power switch on the rear panel when the note appears.
Rebooting the DVR:
While in the Shutdown menu, you can also reboot the DVR.
Shutdown Menu
28