Table of Contents
Advertisement
Step 4 Click Search, and the record files matching the search conditions will be displayed
on a list.
Step 5 Select and click
You can click Back button to return to the search interface.
If there is only one channel triggered, clicking
Playback interface of this channel.
If several channels are triggered, clicking
Playback interface. Check
select multiple channels for synchronous playback.
Note:
The maximum number of channels for synchronous playback supported varies to different
models.
Step 6 On the Event Playback interface, you can select the main stream or sub-stream
from the drop-down list for playback.
The toolbar in the bottom part of Playback interface can be used to control playing
process.
Pre-play and post-play can be configured for the playback of event triggered record files.
Pre-play: The time you set to play back before the event. For example, when an alarm
triggered the recording at 10:00, if you set the pre-play time as 5 seconds, the video plays
back from 9:59:55.
Post-play: The time you set to play back after the event. For example, when an alarm
triggered the recording ends at 11:00, if you set the post-play time as 5 seconds, the video
plays back till 11:00:05.
Video Search by Motion Detection
button to play back the record files.
checkbox to select one channel for playback or
button takes you to Full-screen
button takes you to the Synchronous
97
Advertisement
Table of Contents
