Table of Contents
Advertisement
CONNECTION AND PREPARATION
AV2 (DEC./EXT.)
AV1 (EURO AV)
6
Plug a standard cinch cable into the »
video recorder and the »VIDEO CONTROL« socket (control
line) on the satellite receiver.
7
Plug the EURO AV (Scart) cable supplied in the
AV)« socket on the video recorder and the AV 1
(EURO
socket on the television.
– This connection provides for better picture and sound
quality during playback.
– Stereo sound can only be played back on a stereo televi-
sion set if this connection is used.
8
Plug a standard Scart cable in the »TV« socket on the satel-
lite receiver and the AV 2 socket on the television.
9
Insert the power cord plug in the socket.
– The video recorder is now in standby mode.
10
Connect the satellite receiver to the mains supply.
Caution:
The only way to disconnect the video recorder from the
mains supply is to pull the plug.
Switching the video recorder on and off
(power save mode)
1
Press »
1 ...
2
Press » « to switch to stand-by.
– The video recorder is now in stand-by mode and the
display shows the current time.
3
Press » « to switch off.
– The video recorder is now switched off, the time is no lon-
ger visible in the display and the green indicator » « is
illuminated. The power consumption is now less than
3 Watts.
Note:
You cannot switch off the video recorder if you have set it to
record programs later.
0« to switch on the video recorder.
___________________
« socket on the
»AV 1
15
Advertisement
Table of Contents
