Grundig GD-RT-AC3016N User Manual page 56

For GD-RT-AT5016N, you can select VGA/HDMI1, HDMI2, Main CVBS for video
output interface.
For other models, you can select Main CVBS and HDMI/VGA for video output
interface.
Live View Mode: Selects the display mode to be used for Live View.

Dwell Time: The time in seconds to dwell between switching of channels when

enabling auto-switch in Live View.
Enable Audio Output: Enables/disables audio output for the selected camera in the

live view mode.
Volume: Adjusts the volume of the audio output.

Event Output: Designates the output to show event video. If available, you can select

a different video output interface from the Video Output Interface when an event
occurs.
Full Screen Monitoring Dwell Time: Sets the time in seconds to show alarm event

screen.
Step 2 Set the camera order.
1) Click View tab and select the Video Output Interface from the drop-down list.
2) Click a window to select it, and then double-click a camera name in the camera list
you would like to display. Setting an 'X' means the window will not display any
camera.
Live View-Camera Order
56