Click Export to export all pictures to the storage device.
11.3 Plate Search
This function may not be available in each recorder model.
You can search and view the matched captured vehicle plate picture and related
information according to the plate searching conditions including the start time/end time,
country and plate No.
Step 1 Go to Menu > VCA Search > Plate Search.
Step 2 Select the camera (s) for the plate search.
Step 3 Specify the start time and end time for searching the matched plate pictures.
Step 4 Select the country from the drop-down list for searching the location of the vehicle
plate.
Step 5 Input the plate No. in the field for search.
Step 6 Click Search to start searching. The search results of detected vehicle plate pictures
are displayed in list or in chart.
Note:
Please refer to the Step 7 to Step 8 of Chapter 10.1 Face Search for the operation of the
search results.
11.4 People Counting
This function may not be available in each recorder model.
The People Counting is used to calculate the number of people entered or left a certain
configured area and form in daily/weekly/monthly/annual reports for analysis.
Step 1 Go to Menu > VCA Search > People Counting.
Step 2 Select the camera for the people counting.
Step 3 Select the report type to Daily Report, Weekly Report, Monthly Report or Annual
Report.
Step 4 Set the statistics time.
Step 5 Click the Counting button to start people counting statistics.
Step 6 You can click the Export button to export the statistics report in excel format.
150