Grundig GD-RT-AC3016N User Manual page 71

Steps
Step 1 Go to Menu>Record>Parameters.
Step 2 Set the parameters for recording.
1) Select the Record tab to configure.
2) Select a camera from the camera drop-down list.
3) View the Camera Resolution.
Note:
When HD-TVI, AHD, or HDCVI input is connected, you can view the information including
the input signal type, resolution and frame rate (e.g., 5 MP 20 Hz). When CVBS input is
connected, you can view the information such as NTSC or PAL.
4) Configure the following parameters for the Main Stream (Continuous) and the Main
Stream (Event).
Stream Type: Set the stream type to be Video or Video & Audio.
Resolution: Set recording resolution.
Note:
 GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N support 5
MP and 4 MP resolution of all the channels.
 The 3 MP signal input is available for channel 1 of GD-RT-AC3004N, and for channel
1/2/3/4 of GD-RT-AC3016N.
 The analog signal inputs (HD-TVI, AHD, HDCVI, CVBS) and IP signal input can be
recognized and connected automatically.
 If the configured encoding resolution conflicts with the resolution of the front-end
camera, the encoding parameters will adjust automatically to meet the front-end
Record Parameters
71