10.16 PIR Alarm
This function may not be available in each recorder model.
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's
field of view. The heat energy dissipated by a person, or any other warm blooded creature
such as dogs, cats, etc., can be detected.
Step 1 Go to Menu > Camera > VCA.
Step 2 Select the camera to configure the VCA.
You can check the checkbox of Save VCA Picture to save the captured pictures of
VCA detection.
Step 3 Select the VCA detection type to PIR Alarm.
Step 4 Click
to configure the trigger channel, arming schedule, linkage action and PTZ
linking for the PIR alarm.
Step 5 Click the Rule Settings button to set the rules. Please refer to the Chapter 9.1 Face
Detection for instructions.
Step 6 Click Apply to activate the settings.
147