Channel-Zero Encoding - Grundig GD-RT-AC3016N User Manual

Note:
When H.264 IP camera is connected, the stream type is displayed as H.264. When IP
camera supporting H.264+ is connected, the stream type is displayed as H.264+. When IP
camera supporting H.265 is connected, the stream type is displayed as H.265. When IP
camera supporting H.265+ is connected, the stream type is displayed as H.265+.
For the analog cameras supporting VCA, click the icon to show the VCA information.
Then the configured line or quadrilateral in the VCA configuration and target frame(s) will be
shown on the live view. Click the icon again to hide the VCA information.
Note:
 In the live view, only the analog cameras support VCA information overlay.
 Enable VCA function first before showing the VCA information. Refer to Chapter 10
VCA Alarm for the detailed operation.
 The VCA information is hidden by default. If the connected analog camera does not
support VCA, the icon displays grey and cannot be operated.
 For the analog cameras, the VCA information includes line crossing detection and
intrusion detection.
 The DVR only supports VCA information overlay of one channel. If you enable the
function of one channel, the other channels will disable the function automatically.
 Both single window and multi-window display modes support VCA information
overlay.
 Only the main output supports VCA information overlay. When switching to the aux
output, the VCA information overlay of main output is disabled.
 For the analog cameras, if the camera number does not exceed the limit for line
crossing detection and intrusion detection, the VCA information overlay can be
enabled for all the analog cameras enabled line crossing detection and intrusion
detection. If the camera number exceeds the limit for line crossing detection,
intrusion detection and sudden scene change detection, only the cameras enabled
line crossing detection and intrusion detection support VCA information overlay.
Disabling line crossing detection and intrusion detection remotely will not affect the
VCA information overlay in the local live view.

3.3 Channel-Zero Encoding

Sometimes you need to get a remote view of many channels in real time from web browser
or SCMS (Client Management System) software, in order to decrease the bandwidth
requirement without affecting the image quality, channel-zero encoding is supported as an
option for you.
Step 1 Go to Menu > Configuration > Live View > Channel-Zero Encoding.
Information
54