Grundig GD-RT-AC3016N User Manual page 92

When the 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is
supported. If not, up to 1080P (non-real-time) is supported.
Note:
This chapter is appplicable to GD-RT-AC3004N and GD-RT-AC3016N.
Task 1: Enabling the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.
Step 2 Check the checkbox of 1080P Lite Mode and click Apply to pop up the attention box.
After enabling 1080p lite mode, the 3 MP signal is not accessible to analog channel.
Step 3 Click Yes to reboot the device to have new settings taken effect.
Task 2: Disabling the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.
Step 2 Uncheck the checkbox of 1080P Lite Mode and click Apply. The following attention
box pops up.
Step 3 Click Yes to reboot the device to activate the new settings or No to restore the old
settings.
92