Resetting Your Password; Adding And Connecting The Ip Cameras; Activating The Ip Camera - Grundig GD-RT-AC3016N User Manual

2.6 Resetting Your Password

When you forget the password of the admin, you can reset the password by importing the
GUID file. The GUID file must be exported and saved in the local USB flash drive after you
have activated the device (refer to Chapter 2.2 Activating the Device).
Step 1 On the user login interface, click Forget Password to enter the Import GUID
interface.
Step 2 Select the GUID file from the USB flash drive and click Import button to pop up the
Reset Password interface.
Step 3 Input the new password and confirm the password.
Step 4 Click OK to save the new password. Then the Attention box pops up as shown below.
Step 5 Click OK and the Attention box as below pops up to remind you to duplicate the
password of the device to IP cameras that are connected with default protocol. Click
Yes to duplicate the password or No to cancel it.
Note:
 If you want to retrieve the password when you forget it, you must export the GUID file
first.
 Once the password is reset, the GUID file will be invalid. You can export a new GUID
file. Refer to Chapter 17.5.3 Editing a User for reference.

2.7 Adding and Connecting the IP Cameras

2.7.1 Activating the IP Camera

Reset Password
40