Configuring The Hdd Group - Grundig GD-RT-AC3016N User Manual

1) Select Camera you want to configure.
2) Click More Settings button.
3) Check the checkbox of Redundant Record.
4) Click OK to save the settings.
5) If the encoding parameters can also be used to other channels, click Copy and
choose the channel you want to apply the settings.

5.9 Configuring the HDD Group

You can group the HDDs and save the record files in certain HDD group.
Step 1 Go to Menu > HDD > Advanced > Storage Mode.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For
detailed information, please refer to Chapter 14.3 Managing HDD Group.
Step 2 Select General in the left bar.
Click to enter editing interface.
Step 3 Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply to save your settings.
3) Click OK to back to the upper level menu.
Step 4 Repeat the above steps to configure more HDD groups.
Step 5 Choose the Channels which you want to save the record files in the HDD group.
1) Go to Menu > HDD > Advanced > Storage Mode.
More Settings
87