Activating The Device - Grundig GD-RT-AC3016N User Manual

Step 1 Go to Menu > Shutdown.
Step 2 Click Logout to log out or the Reboot to reboot the DVR.

2.2 Activating the Device

For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser,
Grundig Viewer or the SCMS Client Software.
Step 1 Input the same password in the text field of Create New Password and Confirm
New Password.
WARNING:
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least three
of the following categories: upper case letters, lower case letters, numbers, and special
characters.) in order to increase the security of your product. And we recommend you reset
your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
Step 2 Click OK to save the password and activate the device.
Note:
 Clear-text password is supported. Click the
of the password. Click the icon again and the content of the password restores
invisible.
 For the old version device, if you update it to the new version, the following dialog
box will pop up once the device starts up. You can click YES and follow the wizard to
set a strong password.
Step 3 After the device is activated, the Attention box pops up as below.
Settings Admin Password
29
icon and you can see the clear text