Grundig GD-RT-AC3016N User Manual page 86

Enabling redundant recording and capture, which means saving the record files and
captured pictures not only in the R/W HDD but also in the redundant HDD, will effectively
enhance the data safety and reliability.
Before you start
You must set the Storage mode in the HDD advanced settings to Group before you set the
HDD property to Redundant. For detailed information, please refer to Chapter 14.3
Managing HDD Group. There should be at least another HDD which is in Read/Write
status.
Step 1 Go to Menu > HDD.
Step 2 Select the HDD and click
1) Set the HDD property to Redundant.
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
Step 3 Go to Menu > Record > Parameters > Record.
HDD General
to enter the Local HDD Settings interface.
HDD General-Editing
86