2) Select the camera (s) to be configured with the same OSD settings. You can also
check the checkbox of Analog to select all cameras.
3) Click the OK button to finish the Copy settings and back to the OSD Configuration
interface.
Step 8 Click the Apply button to apply the settings.
15.2 Configuring a Privacy Mask
You are allowed to configure the four-sided privacy mask zones that cannot be viewed or
recorded by the operator.
Step 1 Go to Menu > Camera > Privacy Mask.
Step 2 Select the camera to set privacy mask.
Step 3 Check the checkbox of Enable Privacy Mask to enable this feature.
Copy Settings to Other Cameras
Privacy Mask Settings Interface
188