Vehicle Detection; Line Crossing Detection - Grundig GD-RT-AC3016N User Manual

10.2 Vehicle Detection

This function may not be available in each recorder model.
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the
passed vehicle can be detected and the picture of its license plate can be captured. You
can send alarm signal to notify the surveillance center and upload the captured picture to
FTP server.
Step 1 Go to Menu > Camera > VCA.
Step 2 Select the camera to configure the VCA.
You can check the checkbox of Save VCA Picture to save the captured pictures of
VCA detection.
Step 3 Select the VCA detection type to Vehicle Detection.
Step 4 Check the Enable checkbox to enable this function.
Step 5 Click to configure the trigger channel, arming schedule, linkage action and PTZ
linking.
Note:
The PTZ linking is only applicable to other list, not to whitelist and blacklist.
Step 6 Click the Rule Settings to enter the rule settings interface. Configure the lane,
upload picture and overlay content settings. Up to 4 lanes are selectable.
Step 7 Click Save to save the settings.
Note:
Refer to the User Manual of Network Camera for the detailed instructions for the vehicle
detection.

10.3 Line Crossing Detection

This function may not be available in each recorder model.
This function can be used for detecting people, vehicles and objects cross a set virtual line.
The line crossing direction can be set as bidirectional, from left to right or from right to left.
And you can set the duration for the alarm response actions, such as full screen monitoring,
audible warning, etc.
Step 1 Go to Menu > Camera > VCA.
Step 2 Select the camera to configure the VCA.
137