Table of Contents
Advertisement
1.4 Safety related instructions
1.4.1 DANGER - Moving robots are potentially lethal!
Description
Any moving robot is a potentially lethal machine.
When running, the robot may perform unexpected and sometimes irrational
movements. Moreover, all movements are performed with great force and may
seriously injure any personnel and/or damage any piece of equipment located
within the working range of the robot.
Elimination
1
2
3
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Action
Before attempting to run the robot, make
sure all emergency stop equipment is cor-
rectly installed and connected.
Usually the hold-to-run function is active
only in manual full speed mode. To in-
crease safety it is also possible to activate
hold-to-run for manual reduced speed with
a system parameter.
The hold-to-run function is used in manual
mode, not in automatic mode.
Make sure no personnel are present within
the working range of the robot before
pressing the start button.
© Copyright 2015-2017 ABB. All rights reserved.
1.4.1 DANGER - Moving robots are potentially lethal!
Note
Emergency stop equipment such as gates,
tread mats, light curtains, etc.
How to use the hold-to-run function is de-
scribed in section How to use the hold-to-
run function in the Operating manual - IRC5
with FlexPendant.
1 Safety
47
Advertisement
Table of Contents
