ABB DressPack Product Manual page 206

4 Repair
4.2.5 Replacing the protection hose IRBDP SW6 UI and IRBDP MH6 UI LeanID
Continued
2
3
4
5
Continues on next page
206
Action
Remove the clamp jaw.
Open the hose clamps securing the cable
and hose retainer.
Remove the cable and hose retainer.
Carefully pull the cables and hoses out and
remove the back part of the protection
hose.
Tip
The following order is preferred:
1 Cables with small connectors
2 Hoses
3 Cables with large connectors
© Copyright 2015-2017 ABB. All rights reserved.
Note
xx1400000347
xx1400000348
xx1400000349
Best performed in this order:
1 Cables with the smallets connectors
2 Hoses
3 Cables with the biggest connectors.
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B