ABB DressPack Product Manual page 184

4 Repair
4.2.3 Replacing the cable package IRBDP SW6 LI LeanID
Continued
7
8
9
Continues on next page
184
Action
Fasten the cabling in the axis-3 ball joint
housing.
Note
Be careful not to loose the small o-ring!
The purpose of the o-ring is to keep the
screws in place in the housing, upper part.
Fasten the cabling in the ball joint housings
on the lower arm bracket.
Note
Be careful not to loose the small o-ring!
The purpose of the o-ring is to keep the
screws in place in the housing, upper part.
Fasten the cabling in the ball joint housings
on the lower arm.
Note
Be careful not to loose the small o-ring!
The purpose of the o-ring is to keep the
screws in place in the housing, upper part.
© Copyright 2015-2017 ABB. All rights reserved.
Note
xx1500002653
M8x16 8.8-A2F (2 pcs)
xx1500002654
M8x16 8.8-A2F (2x 2 pcs)
xx1500002658
M8x16 8.8-A2F (2 pcs)
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B