2 Installation
2.4.3.1 Fitting attachments of the IRBDP MH3 UI
Continued
Fitting the cable package attachments - IRBDP MH3 UI
Use this procedure to fit the cable attachments of the cable package IRBDP MH3
UI.
1
2
3
Continues on next page
74
Action
Move the robot to a suitable position for fit-
ting the cable attachments on the upper
arm.
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot
working area.
Fasten the upper arm bracket. Lock screws
with Loctite 243 ( Locking liquid).
© Copyright 2015-2017 ABB. All rights reserved.
Note
xx1500003002
M8x16 A2-7 0 (2 pcs)
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B