ABB DressPack Product Manual page 214

4 Repair
4.3.1 Replacement of Air supply circuit
Continued
Removal
The procedure below details how to remove the Air supply circuit. It does not deal
with details specific to each version, such as article numbers, connector types etc.
For details see the Spare parts section.
1
2
3
4
5
6
7
8
9
10
11
Refitting
The procedure below details how to refit the air supply circuit. It does not deal with
details specific to each version, such as article numbers, connector types etc. For
details see the Spare parts section.
1
2
3
4
5
Continues on next page
214
Action
CAUTION
The system contains compressed air! Observe the
safety information in section
pneumatic/hydraulic systems on page
Turn off the hand operated air valve on the air sup-
ply circuit.
Turn off the shop floor air supply to the Water and
Air unit.
Remove the hose of the compressed air supply of
the workshop.
Remove the Proc 1 hose from the air supply unit.
Remove the Proc 4 hose from the air supply unit.
Disconnect the pressure switch tube from the Air
circuit Cross interface.
Disconnect the pressure switch connector on the
split box, according to the circuit diagram.
Disconnect the pressure switch from the mounting
plate.
If the option proportional valve is selected, discon-
nect the proportional valve connectors on the split
box according to the circuit diagram.
Unscrew the four attachment screws holding the
air supply circuit and remove it.
Action
Fit the air supply circuit with its four attachment
screws.
Connect the proportional valve connectors on the
split box according to the circuit diagram.
Connect the pressure switch to the mounting plate.
Connect the pressure switch connector on the split
box according to the circuit diagram.
Connect the pressure switch tube from the Air circuit
Cross interface.
© Copyright 2015-2017 ABB. All rights reserved.
Note
Safety risks related to
27.
The air hoses on the robot will be
decompressed.
Only if the option Proportional
valve has been selected.
Note
Only if the option Proportional
valve has been selected.
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B