Table of Contents
Advertisement
Equipment, etc.
Material set IRBDP MH LI
Required tools and equipment
Equipment, etc.
Standard toolkit
Consumables
Equipment, etc.
Locking liquid
Fitting the cable package IRBDP MH LI
Use this procedure to fit the cable package IRBDP MH LI.
Connect the cable package at the base
1
2
3
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Article number
3HAC053920-001
Article number
-
Article number
3HAB7116-1
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot working
area.
CAUTION
The cable package is sensitive to mechanical
damage. Handle it with care in order to avoid
damaging the cabling or the connectors.
Remove the rear cover plate.
© Copyright 2015-2017 ABB. All rights reserved.
2.4.2.1 Fitting the cable package IRBDP MH LI
Note
Note
Content is defined in section
Standard toolkit on page
Note
Loctite 243
Note
xx1500002963
Continues on next page
2 Installation
Continued
233.
65
Advertisement
Table of Contents
