ABB DressPack Product Manual page 67

8
9
10
11
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Action
Run the cables down through the center hole of
axis 1.
• Make a check that the cables and hoses
do not cross each other.
Fit the R1.CP/CS cable to the customer plate.
Secure the R1.CP/CS connector.
Connect the rest of the cable and hose connectors
to the customer plate.
CAUTION
Do not tighten the brass couplings for water and
air with excessive force.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
© Copyright 2015-2017 ABB. All rights reserved.
2.4.2.1 Fitting the cable package IRBDP MH LI
Note
xx1500002968
xx1400001142
xx1400001143
M6x25 A2-70 (2 pcs)
Tightening torque, brass couplings
1/2": 31
Tightening torque, brass couplings
3/8": 17
xx1200000088
Continues on next page
2 Installation
Continued
67