ABB DressPack Product Manual page 90

2 Installation
2.4.4.2 Fitting the cable package IRBDP SW6 LI, Lean ID
Continued
Required consumable
Equipment, etc.
Locking liquid
Cable grease
Fitting the cable package
Use this procedure to fit the cable package.
Preparations
1
2
3
Fasten the cable package
1
Continues on next page
90
Action
Move the robot to a comfortable working
position.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
Remove the rear cover plate (if not already
removed).
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
© Copyright 2015-2017 ABB. All rights reserved.
Art. no.
3HAB7116-1
3HAC14807-1
Note
xx1400000197
Note
Product manual - DressPack/SpotPack IRB 8700
Note
Loctite 243, for locking
screws.
Optitemp RB2
3HAC055802-001 Revision: B