ABB DressPack Product Manual page 60

2 Installation
2.3 Fitting the process turning disc
Continued
Fitting the process turning disc
1
2
3
4
5
6
7
Continues on next page
60
Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
CAUTION
The process turning disc weight is 50 kg.
All lifting equipment must be sized accord-
ingly.
Attach the roundsling to the process turn-
ing disc and to an overhead crane or simil-
ar.
Stretch the roundsling to take the weight
of the process turning disc.
Wipe clean the contacts surfaces.
Foundry Plus:
Apply Mercasol on the surfaces on the
process turning disc and axis-6 gearbox
as shown in the figure.
Secure the process turning disc with its
attachment screws and washers.
© Copyright 2015-2017 ABB. All rights reserved.
Note
Roundsling 1 m, Lifting capacity: 1,000 kg
xx1400000385
Tightening torque: 120
xx1500003048
M12x40 12.9 Gleitmo 603 (22 pcs)
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
B
A