ABB DressPack Product Manual page 171

5
6
7
Refitting the cable package
Refitting the cable package
1
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Action
Secure the R1.CP/CS connector.
Connect the rest of the cable and hose connectors
to the customer plate.
CAUTION
Do not tighten the brass couplings for water and
air with excessive force.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
Refit the rear cover plate.
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
© Copyright 2015-2017 ABB. All rights reserved.
4.2.2 Replacing the cable package IRBDP MH LI
Note
xx1400001143
M6x25 A2-70 (2 pcs)
Tightening torque, brass couplings
1/2": 31
Tightening torque, brass couplings
3/8": 17
xx1200000088
xx1500002969
Note
4 Repair
Continued
Continues on next page
171