Table of Contents
Advertisement
2 Installation
2.10.1 Installation of Water and air unit
Continued
Required equipment
Equipment, etc
Water and Air unit
Standard toolkit,
DressPack/SpotPack
Reference documents
Document
Circuit diagram - SpotPack
SWC IRC5 M2004
Circuit diagram - SpotPack
SWC IRC5 Design 2014
PROFINET
Installation of Water and air unit
The procedure below details how to install the Water and Air unit on the robot base.
1
2
Continues on next page
124
Art. no.
For spare part number
see chapter:
•
Spare parts on
page
3HAC17290-7
Document number
3HAC026208-001
3HAC044736-001
Action
DANGER
Turn off all:
•
electric power supply
•
water pressure supply
•
air pressure supply
to the robot, before entering the robot working
area.
Remove the attachment screws securing the
top cover at the base of the robot.
Do not remove the top cover!
Note
The screws will be reused when fitting brackets.
© Copyright 2015-2017 ABB. All rights reserved.
Note
237.
The contents are defined in section
Toolkits, DressPack/SpotPack on page
Note
Valid for all robots without
PROFINET.
Valid for all robots with option 782-
13 Bosch MFDC PROFINET.
Note
xx1300002322
Product manual - DressPack/SpotPack IRB 8700
233.
3HAC055802-001 Revision: B
Advertisement
Table of Contents
