Table of Contents
Advertisement
2 Installation
2.10.2 Return water flow control
2.10.2 Return water flow control
Overview
The mechanical flow control valve is pre-set at delivery at 8 liter/min (maximum
flow).
Settings
The procedure below details how to set the mechanical flow control valve.
1
2
3
130
Action
Open the solenoid valve on the water inlet.
Water flow is indicated on the scale of the Flow
control valve.
Adjust water flow by using the red adjusting knob
on the scale of the Flow control valve to the required
set flow.
© Copyright 2015-2017 ABB. All rights reserved.
Note
The red adjusting knob is placed
on the back of the Water and Air
unit.
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Advertisement
Table of Contents
