ABB DressPack Product Manual page 165

Spare parts
The following equipment is required for the replacement of the lower arm cable
package IRBDP MH LI.
Spare part
Cable package IRBDP MH LI
Required tools and equipment
The following equipment is required for the replacement of the cable package
IRBDP MH LI.
Equipment
Standard toolkit, DressPack/Spot-
Pack
Removing the cable package
Use this procedure to remove the cable package IRBDP MH LI.
Disconnecting the cable package
1
2
3
Product manual - DressPack/SpotPack IRB 8700
3HAC055802-001 Revision: B
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
CAUTION
The cable package is sensitive to mechanical
damage. Handle it with care in order to avoid
damaging the cabling or the connectors.
Remove the rear cover plate.
© Copyright 2015-2017 ABB. All rights reserved.
4.2.2 Replacing the cable package IRBDP MH LI
Spare part num- Note
ber
See Spare parts on
page 237.
Article number Note
3HAC17290-7 The contents are defined in sec-
tion Toolkits, DressPack/Spot-
Pack on page
Note
xx1500002963
4 Repair
Continued
233.
Continues on next page
165