Commissioning Using The Bop; The Basic Operator Panel (Bop) - Siemens SINAMICS CU240S DP-F Operating Instructions Manual

5.5

Commissioning using the BOP

5.5.1

The Basic Operator Panel (BOP)

The Basic Operator Panel (BOP) is used for effective
parameterizing and control of the inverter. The control
signals and speed reference can easily be set by pressing
the appropriate buttons. The BOP has the ability to upload
and download parameter sets from an inverter to another
inverter.
Fitting the BOP to the Control Unit
The BOP is fitted to the Control Unit as shown in
the figure below. No matter which type of Control
Unit is being used, the process is the same.
Control Units CU240S
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
5.5 Commissioning using the BOP
Basic Operator Panel (BOP),
6SL3255-0AA00-4BA1
Fitting the BOP to the CU
Commissioning
55