Commissioning With The Operator Panel; Function Of The Basic Operator Panel - Siemens Sinamics G120 CU240E Operating Instructions Manual

4.6

Commissioning with the operator panel

4.6.1

Function of the Basic Operator Panel

The Basic Operator Panel (BOP) offers various commissioning options and ways of Saving
and transferring data using the BOP (Page 77).
The Basic Operator Panel for 'local' operation and how to attach it to the Control Unit
The Basic Operator Panel is an input and display instrument that allows you to operate
inverters "locally". A BOP can be used for more than one inverter and is mounted directly on
a Control Unit.
The Basic Operator Panel can be used to commission drives, monitor operation and set
individual parameters. Parameter changes that are made using the BOP are saved so that
they are protected against power failure.
It has eight keys and a two-line screen for displaying values and units.
Line 1 shows a parameter number or value
Line 2 shows the corresponding physical unit
The keys can be used, for example, to set control signals and the speed setpoint.
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
4.6 Commissioning with the operator panel
How to attach the BOP to the Control Unit.
Commissioning
71