Programming With Keyboard And Menu; Basic Operator Panel Bop20; Description; Interface Description - Siemens S120 PM240-2 Manual

10 PROGRAMMING WITH KEYBOARD AND MENU

For simplicity it is preferable to perform the commissioning via PC using the STARTER software,
rather than setting the parameters from the operator panel. See Chapter Errore. L'origine
iferimento non è stata trovata..
10.1

BASIC OPERATOR PANEL BOP20

10.1.1 Description

The Basic Operator Panel BOP20 is an operator panel with six keys and a backlit display unit. The BOP20
can be inserted on the CU310-2 PN SINAMICS Control Units and operated.
The BOP20 supports the following functions:

Input of parameters and activation of functions

Display of operating modes, parameters, alarms and faults

10.1.2 Interface description

Figure 32 - Basic Operator Panel BOP20
Overview of displays and keys
Figure 33 - Overview of displays and keys
Table 14 Views
Display
Top left 2 positions
Siemens PM240-2_EN_rev00-30082019.docx
Meaning
The active drive object of the BOP is displayed here.
The displays and key operations always refer to this drive object.
10-1