Figure 1-15 Communication Setup Window; Figure 1-16 Pump Utility Screen Fields To Populate Data - Siemens Q3920 Retrofit Manual

_________________________________________________________________________________________________________
3. Next, click on the Connect button on the PUMP Utility to connect to the UUT. Once the
QPN, App version, ROM version, and serial number fields are populated with data on
the PUMP Utility screen, the UUT is connected.

Figure 1-16 PUMP Utility Screen Fields to Populate Data

4. Once connected to the UUT, click on the "Communicate" button in the PUMP Utility
screen to open the communicate window. The communicate window will display as
shown below.
OBE-00-22-01
Version No.: A.1

Figure 1-15 Communication Setup Window

1-13
Q3920 EOT 3G TO 4G CONVERSION
JANUARY 2022