Tools; Window; Help; Run Macros Drop-Down - Extron electronics AXP 64 C AT User Manual

Tools

Configure Digital I/O — Opens the Configure
•
Digital I/O dialog box to assign actions and modes
to the digital inputs and outputs.
• Connect/Disconnect from Device — In
mode,
Connect to Device dialog box. In Live mode,
Disconnect from Device is listed and returns the
software to
• Device Manager — Opens the
box.
• Issue RESET Command — Clears the device of all processors and other configuration
settings. This command does not reset general settings such as IP address.
• Organize Building Blocks — Opens the
• Device Settings — Opens the
address, DHCP status, and other settings.
• Options — Opens the
default settings, DSP value defaults, and so on.
•
Network Audio Control — Opens the Dante Controller application by Audinate for routing
audio over a Dante network.

Window

The Window menu offers the standard Windows Window Menu options such as Cascade
and Close All Windows.

Help

The Help menu offers the standard Windows Help Menu options such as Content,
Search, and About. The help file can be accessed by clicking Content.

Run Macros Drop-Down

The Run Macro drop-down list (see image at the right) is available
when connected to the AXP 64 C AT in Live mode to view and run all
macros that have been pushed to the device. The drop-down list is
unavailable in Emulate mode.
The list of macros updates dynamically when a new macro is created.
Macros created in DSP Configurator that have not been pushed to
the device appear in the list with an asterisk to the right of the macro
name. Only macros that have been pushed to the device can be run
from the Run Macro drop-down list.
Connect to Device is listed and opens the
Emulate mode.
Device Manager dialog
Device Settings dialog box to edit date and time, IP
Options dialog box to configure DSP Configurator appearance,
Emulate
Organize Building Blocks dialog box.
AXP 64 C AT • DSP Configurator Configuration 19