Internal Temperature Screen; Factory Default Submenu; Adding And Configuring Window Text; Picture Controls - Extron electronics Multi-Graphic Processor MGP 464 User Manual

Internal Temperature screen

The Internal Temp submenu displays the unit's current internal temperature. The
MGP 464 displays the temperature in degrees Fahrenheit and Celsius. This is an
information-only screen; no adjustments can be made on it.

Factory Default submenu

This submenu lets you reset the MGP 464 to the default settings with which it was
delivered from the factory. Press the Detail button to initiate the reset.

Adding and Configuring Window Text

You can add a text box or label, containing up to 16 characters, to each window.
You can also specify several parameters for the text label, including text size and
color, label background color, label border color, and the position of the text box on
the screen.
These window text specifications cannot be made from the front panel. You
can create and configure the label using the Windows-based control software
or SIS commands via the RS-232/422 rear panel port (see chapter 4, "Software
Configuration and Control"), or using the MGP 464 Web pages (see chapter 5,
"HTML Configuration and Control").

Picture Controls

The MGP 464 has six picture control buttons located on the front panel to the left of
the menu button. You can use these buttons to adjust size, position, brightness and
contrast, color and tint, detail, and magnification (zoom).
N Picture controls are window-dependent. You set the values separately for each
N For Window/Image Size, Window/Image Position, and Window Image Zoom,
The Picture Controls table on the next page shows the buttons, their functions,
and how to make adjustments. (In the Display column, n stands for a single digit,
0 through 9.)

Picture Controls table

Button Display
WINDOW_n SIZE:
H=nnnn
Window/
(Press button twice.)
Image Size
IMAGE #nn SIZE:
H=nnnn
BRIT
nnnn
Bright/Cont
window.
pressing the button repeatedly switches back and forth between window settings
and image settings.
Function
Enlarge or shrink
V=nnnn window 1, 2, 3, or 4.
Enlarge or shrink
the image within the
V=nnnn window.
CONT Brightness: Increase
or decrease intensity of
nnnn
video light on screen.
Contrast: Increase or
decrease range of image
light and dark values.
Range Adjust Knob
Min: 1/16 of the For H (width):
output rate horizontal [
Adjust knob
Max: Output rate
For V (height):
Min: 1/16 of the
vertical {
output rate
Adjust knob
Max: 2 times the
output rate
Brightness: 000-127 Bright:
Default: 064 horizontal [
Adjust knob
Contrast: 000-127
Default: 064 Contrast:
vertical {
Adjust knob
MGP 464 • Operation 3-21