Sanken S06-4A005-B Instruction Manual page 94

23 FR+2DF+3DF
Multiplexed
24 RR+2DF+3DF
Multiplexed
25 FR+AD2+2DF
Multiplexed
26 RR+AD2+2DF
Multiplexed
27 FR+AD2+3DF
Multiplexed
28 RR+AD2+3DF
Multiplexed
29 FR+AD2+2DF+3DF
Multiplexed
30 RR+AD2+2DF+3DF
Multiplexed
31 FR+AD3+2DF
Multiplexed
32 RR+AD3+2DF
Multiplexed
33 FR+AD3+3DF
Multiplexed
34 RR+AD3+3DF
Multiplexed
35 FR+AD3+2DF+3DF
Multiplexed
36 RR+AD3+2DF+3DF
Multiplexed
37 PTR Simple graph operation counter reset
Multiplexed
signal
38 T-FCL Frequcy clear Teminal
39 Multiplexed FR+5DF
*1 When the terminal is set to ON, F1316: limits the frequency with the 2nd upper frequency limit.
*2 When the terminal is set to ON, F1317: limits the frequency with the 3rd upper frequency limit.
F1422 Reference frequency for pulse train input
Reserved
Effective number of bits for VIF1 detection
F1423
F1424
Effective number of bits for
Functions for setting the resolution (effective number of bits) of external analog signal reading.
Code No. Function Name
F1423 Effective number of bits for
F1424
VIF1 detection
Effective number of bits for
VRF/IRF
detection
This function is used to make the detection value of external analog signal stable and effective where interference exists in the external
analog signal. And, if the effective number of bits is reduced, then the action in S-shaped acceleration/deceleration curve becomes
more stable.
Effective number of bits for VIF1, VRF/IRF ection
Effective number of bits can be assigned to VIF1, VRF/IRF independently.
F1501 Internal analog output function1
Internal analog output coefficient 1
F1502
F1503 Internal analog output bias 1
Internal analog output function2
F1504
F1505 Internal analog output coefficient 2
F1506 Internal analog output bias 2
Functions for analog output (0-10V) of a variety of internal states of inverter between the control circuit terminal's analog output
terminals AOUT1, AOUT2 and analog signal common terminal ACM.
Code No. Function Name
F1501 Internal analog output function1
F1504 Internal analog output function2
253～255
VRF/IRF
detection
Data Content
8～12bit
= 8, when this value is set, 4 lower bits are inactive.
= 9, when this value is set, 3 lower bits are inactive.
= 10, when this value is set, 2 lower bits are inactive.
= 11, when this value is set, 1 lower bit is inactive.
= 12, when this value is set, no inactive bit.
Data Content
0：No function
1: Set frequency (Hz)
2：Output frequency [Hz]
3：PID1 feedback value [Hz]
- 93 -
87 RPID1 PID1 reset terminal
88 PID1EX PID1 External terminal selection
89 PID2EX PID2 External terminal selection
91 IHOLD PID integral value hold terminal
92 ICLEAR PID integral value clear terminal
109 RCCL Deviation counter reverse run clear signal
114 1DFA 1st speed frequency selection 1
115 1DFB 1st speed frequency selection 2
116 Multiplexed 1DFA+1DFB
terminal
117 ROPE Control authorization selection 1
118 RCOM Control authorization selection 2
119 ROPE+RCOM
Multiplexed
120 1DFA+ROPE
Multiplexed
121 1DFB+RCOM
Multiplexed
122 1DFA+1DFB+ROPE+RCOM
Multiplexed
For factory adjustment
Setting Resolution
1bit
Setting Resolution
Factory Presets
12bit
Factory Presets
1 0