Sanken S06-4A005-B Instruction Manual page 194

3203 External PID control
selection
5001 Motor poles, voltage and
capacity
5011 Motor primary inductance
Motor secondary
5012
inductance
5013 Motor mutual inductance
6002 Torque limiter
input function
running)
6004 Torque limiter analog
input function (braking)
6015 Lower frequency limit for
motor vibration reduction
function
6016 Upper frequency limit for
motor vibration reduction
function
6101 Torque command
selection
6103 Positive upper value of
torque command
6104 Positive lower value of
torque command
6105 Negative upper value of
torque command
6106 Negative lower value of
torque command
※Exxxx represents analog input repetition function code.
1 E3203
2 E3203
4, 5 E3203
All Exxxx
1 E3203
2 E3203
4, 5 E3203
All Exxxx
All Exxxx
Exxxx
E1007/E1316/E1317
All E5013
All E5013
All E5011
E5012
analog All Exxxx
(power
All Exxxx
All E6016
All E6015
All Exxxx
All E6104
All E6103
All E6106
All E6105
Same PID control cannot be used both internally
and externally
Same PID control cannot be used both internally
and externally
Same PID control cannot be used both internally
and externally
Cannot set analog input repeatedly
Same PID control cannot be used both internally
and externally
Same PID control cannot be used both internally
and externally
Same PID control cannot be used both internally
and externally
Cannot set analog input repeatedly
The motor is not applicable when its capacity has
a large difference with inverter capacity
Vector control mode is only applicable to 2-, 4-
and 6-pole motors
Exceed the possible upper frequency limit
Mutual inductance should be smaller than
primary inductance
Mutual inductance should be smaller than
secondary inductance
Mutual inductance should be smaller than
primary inductance
Mutual inductance should be smaller than
secondary inductance
Cannot set analog input repeatedly
Cannot set analog input repeatedly
Cannot exceed the upper frequency limit
Cannot be under the lower frequency limit
Cannot set analog input repeatedly
Cannot be under the lower limit value
Cannot exceed the upper limit value
Cannot be under the lower limit value
Cannot exceed the upper limit value
- 193 -