Sanken S06-4A005-B Instruction Manual page 179

Second byte
Third byte
Note: The "Reverse run" bit during stop is changed through the last operation status. When it is
necessary to confirm forward or reverse run, please also confirm the status of "Gate ON" bit.
Fourth byte
Control terminal board data
③
Control terminal board data is returned in four bytes.
First byte
Second byte
bit0: Decelerating to stop
bit1: Raising frequency
bit2: Lowering frequency
bit3: Matching frequency
bit1: Reverse run (see note)
bit2: Gate ON
bit3: Frequency locked
bit0: Standby
- 178 -