Sanken S06-4A005-B Instruction Manual page 119

3) Setting method
Enter 2-digit value into the forward/reverse run and acceleration/deceleration (F2221~F2235) in T1~T15.
F2221 Forward/reverse run and Acceleration/Deceleration in T1
F2222 Forward/reverse run and Acceleration/Deceleration in T2
Forward/reverse run and Acceleration/Deceleration in T3
F2223
F2224 Forward/reverse run and Acceleration/Deceleration in T4
F2225 Forward/reverse run and Acceleration/Deceleration in T5
Forward/reverse run and Acceleration/Deceleration in T6
F2226
F2227 Forward/reverse run and Acceleration/Deceleration in T7
F2228 Forward/reverse run and Acceleration/Deceleration in T8
F2229 Forward/reverse run and Acceleration/Deceleration in T9
F2230 Forward/reverse run and Acceleration/Deceleration in T10
Forward/reverse run and Acceleration/Deceleration in T11
F2231
F2232 Forward/reverse run and Acceleration/Deceleration in T12
F2233 Forward/reverse run and Acceleration/Deceleration in T13
Forward/reverse run and Acceleration/Deceleration in T14
F2234
F2235 Forward/reverse run and Acceleration/Deceleration in T15
Code No.
F2221 Forward/reverse and Acceleration/Deceleration in T1
F2222 Forward/reverse and Acceleration/Deceleration in T2
F2223 Forward/reverse and Acceleration/Deceleration in T3
F2224 Forward/reverse and Acceleration/Deceleration in T4
F2225 Forward/reverse and Acceleration/Deceleration in T5
F2226 Forward/reverse and Acceleration/Deceleration in T6
F2227 Forward/reverse and Acceleration/Deceleration in T7
F2228 Forward/reverse and Acceleration/Deceleration in T8
F2229 Forward/reverse and Acceleration/Deceleration in T9
F2230 Forward/reverse and Acceleration/Deceleration in T10
F2231 Forward/reverse and Acceleration/Deceleration in T11
F2232 Forward/reverse and Acceleration/Deceleration in T12
F2233 Forward/reverse and Acceleration/Deceleration in T13
F2234 Forward/reverse and Acceleration/Deceleration in T14
F2235 Forward/reverse and Acceleration/Deceleration in T15
Example: set the operation direction and acceleration/deceleration time in T1 into the third acceleration/deceleration time with
reverse run
Note 1： The inching operation before startup of simple graph operation should be as normal. (Forward & reverse)
For the occasions of half stop during simple graph operation, the inching operation should also be as normal.
Function Name
Acceleration/deceleration time specified
st
1=1 acceleration/deceleration time (F1012&F1016）
nd
2=2 acceleration/deceleration time (F1013&F1017)
rd
3=3 acceleration/deceleration time (F1014&F1018)
th
4=4 acceleration/deceleration time (F1015 &F1019)
- 118 -
Data Content Setting Resolution
X Y
X...1：forward, 2：reverse
Y...1～4：
Acceleration/deceleration
time specified
Factory Presets
— 11
11
11
11
21
21
21
11
11
11
11
21
21
21
21
Forward/reverse specified
1=forward，2=reverse。