Sanken S06-4A005-B Instruction Manual page 74

F1020 JOG acceleration/deceleration time 0.1s
0～20s 0.1s
The representative parameters that are suitable for various models have been input.
※
Example) When F1011 = 50 Hz, F1012 = 5 seconds, the acceleration slope is set to 10Hz / s.
● In the V/f mode, even if the acceleration/deceleration time is set to 0 s, the actual value will still be 0.1 s.
● The 2nd thru 4th acceleration/deceleration times are selected by the combination of signals input to control input terminals AD2
and AD3.
- 73 -