Sanken S06-4A005-B Instruction Manual page 142

External multi-function terminal input signal (DI1~DI8)
=86 : PIDH
OFF
OFF
ON
ON
Note: When switching the PID control through external terminals, the PID control output may change rapidly
according to the system control status; there may also be the protective actions for over-current, over-voltage and
so on.
When adjusting switching time and each PID control parameter, please make an adjustment upon fully
consideration of the changes to the actions of the control system.
=85 : PIDL PID switching terminal
OFF Open loop control
ON PID1 control
ON PID2 control
OFF Open loop control
- 141 -