Sanken S06-4A005-B Instruction Manual page 53

1704 Overload alarm level
setting value
1705 Motor type
1706 Function to switch
between "OV" and
"LV" alarms when
stopped
1707 Missing Phase
detection function
1708 Overvoltage stalling
prevention function
1709 Feedback signal
disconnection
detection time
1710 Carrier frequency
variable by lowering
temperature
(Active when only
mode A is selected)
1801 Inverter host software
version query
1802 Memory Version query
1803 Operation panel
software version query
1804 Operation time display
1805 Reading alarm data
1806 Alarm status
confirmation1
1807 Alarm status
confirmation2
1808 Alarm status
confirmation3
1809 Alarm status
confirmation4
1810 Alarm status
confirmation5
Special functions
1901 Energy-saving mode
selection
1902 Simple energy saving
rate
1903 Simple energy saving
time
2001
V•f separation
function selection
2002 V·f separation
command voltage
2003 Arbitrary V/f pattern
intermediate voltage 1
2004 Arbitrary V/f pattern
intermediate voltage 2
2005 Arbitrary V/f pattern
1：Yes, V/F mode, (Currently selected
acceleration/deceleration time)
2：Yes, V/F mode, (1st acceleration/deceleration time)
3：Yes, V/F mode,
(2nd acceleration/deceleration time)
4：Yes, V/F mode,
(3rd acceleration/deceleration time)
5：Yes, V/F mode, (4th acceleration/deceleration time)
6：Yes, V/f mode and speed vector control mode
(1st acceleration/deceleration time)
7：Yes, V/f mode and speed vector control mode
(2nd acceleration/deceleration time)
8：Yes, V/f mode and speed vector control mode
(3rd acceleration/deceleration time)
9：Yes, V/f mode and speed vector control mode
(4th acceleration/deceleration time)
A MODEL
B MODEL
1：General-purpose motor
2：Exclusive motor for the inverter
0："OV" enabled, "LV" disabled when stopped
1："OV" disabled, "LV" enabled when stopped
2："OV" disabled, "LV" disabled when stopped
3："OV" enabled, "LV" enabled when stopped
0：No input phase loss, no output phase loss
1：Input phase loss, no output phase loss
2：No input phase loss, output phase loss
3：Input phase loss, output phase loss
0：No overvoltage stalling prevention function.
1：Overvoltage stalling prevention function.
0：Only warning
0.01 -119.99 sec.
120: No detection
0：Disabled
1：Enabled
Read only
Read only
Read only
Read only
0：No function
1：Read start
9：Record erase
Read only
Read only
Read only
Read only
Read only
0：No function
1：Simple energy-saving mode (V/f mode)
2：Auto energy-saving mode
0～50%
0～65000s
1：V · f proportional separation
2：Complete separation
0：Disabled (command is given by VIF1)
0.01～40.95V
0～460V
0～460V
0.05～400Hz
20～200%
20～150%
- 52 -
1% 150
120
1 1
1 0
1 3
1 1
0.01 s 5
1 0
Version
Version
Version
1 hour ---
1 0
--- ---
--- ---
--- ---
--- ---
--- ---
1 0
1% 0
1s 10
1 1
0.01V 0
1V 0
1V 0
0.01Hz 20