Fold Section Adjustments - Horizon Fitness Bookletmaker SPF-200A Manual

4-4

Fold Section Adjustments

Fold Skew Adjustment
- Fold skewing can be corrected by changing the
angle of the fold section stopper.
- Correct for fold skewing by turning the fold skew
correction knob.
To find the standard setting, turn the knob
clockwise as far as possible. Next, turn
the knob 1 to 1.5 turns counter-clockwise.
Fold Knife Height Adjustment
- Raise the fold knife position if the fold rollers can-
not pick up a small number of sheets even if the
fold knife holds up the sheets.
- To find the standard position, turn the knob
clockwise as far as possible. Next, turn
the knob counter-clockwise three turns.
Do not raise the fold knife too far. If the
top-bottom length of sheet is short, the
fold rollers and fold knife may hit each
other and may be damaged. Adjust the
knob in small amounts.
Attachment of Small Booklet Hold-Down
Plate
- If a small size sheet (sheet length less than 200
"
mm or 7.87 ) stops after passing through the gate,
attach the small booklet hold-down plate.
- To attach the plate, hook it over the gate shaft.
- The hold-down plate works by pushing the sheet
against the belts.
- Remove the hold-down plate if the sheet length is
more than 400 mm or 15.75
CAUTION
."
11119
40401B1
Low
High
11119
40401D1
Small Booklet Hold-
Down Plate
11119
40401A1
11119
40401C1
Gate
11119
40401E1
83
4