Wire Attachment - Horizon Fitness Bookletmaker SPF-200A Manual

8-3 Four Stitching Kit FST-200

8-3-4 Wire Attachment

1
Install the wire attaching bar on
the main unit.
2
Attach the wire coil.
- Refer to 6-1.
3
Install the wire guide.
1. Remove the cable cover.
2. Install the wire feeding detection sensor
bracket with the wire guide.
3. Install the wire guide to the wire tube.
4. Remove the stitcher head covers on the
front side and rear side.
- Each cover can be removed only by loosen-
ing a single mounting screw.
5. Remove the left stitcher head cover.
Washer
(Large)
Washer (Medium)
Wire Feeding Detection
Sensor Bracket
Cable Cover
11119
80304B1
8-3-4
Wire Attachment
Wing Nut
Washer(Small)
11119
80304A1
Wire Guide
Loosen
Wire Tube
Stitcher Head Rear
Cover
11119
80304C1
Stitcher Head
Left Cover
11119
80304D1
171
8