Control Panel - Horizon Fitness Bookletmaker SPF-200A Manual

1-2

1-2-10 Control Panel

When the power is first turned on,
these buttons will not work until the
first changeover has been done.
Machine Jog Button
This jogs the jog section and the fold section. Jog-
ging is stopped when this button is pressed again.
This button will work even if a cover is opened.
Fore-edge Trim
Section Power LED
Trim Knife
Reverse Jog
Button
When this button is
pressed and held, the trim
knife operates once and
then stops at the top posi-
tion. If the knife is locked,
the trim knife can be
returned to the top posi-
tion using this button.
When some screens are displayed on
the touch screen, these buttons will not
work.
12
Machine Descriptions
11119
10210C1
Transport Belt
Inching Button
The transport belt at
the fore-edge trim sec-
tion drives only while
this button is pressed.
Stitch Jog Button
Operating the stitcher heads in the normal direction
Press and hold this button to make one stitch in the normal
direction while the cover is closed and the Emergency Stop
button is not pressed.
Reversing the stitcher heads
The stitcher heads will return to the original position by
reverse movement if you press this button while pressing
the Machine Jog button when the cover is closed and the
Emergency Stop button is not pressed. See page 75 for
details.
11119
10210B1
Releasing the top and bottom guides
The top and bottom guides move outward if this button is
pressed while the cover is opened or the Emergency Stop
button is pressed. Any sheets remaining at the jog section
can be removed easily. (The top and bottom guide returns to
its setting position when the jog button is pressed.)
11119
Stop Button
10210D1
This button stops the binding
operation. Feeding from the
upstream device stops when
this button is pressed. All book-
lets in-process are delivered,
and the transport rollers keep
moving. When this button is
pressed again, the machine
stops completely.
Control Panel
Main Machine Power
LED
This LED lights when the
power switch is turned On.
11119
10210A1 The LED blinks if the machine
is using the power saving
mode.
Start Button
This button starts the binding oper-
ation. If there are sheets remaining
inside the machine, they will be
ejected. While this is happening,
the button blinks. When the
machine is ready, the button lights
and feeding from the upstream
device (collator) starts.
1-2-10