Horizon Fitness Bookletmaker SPF-200A Manual page 58

3-3 Doing a Changeover
50
-Attach stitcher
head assemblies
with the clinchers.
Refer to Section
8-3-2 through 8-
3-5 for instruc-
tions.
11119
30302A1
Move the fore-edge
trim section to the
front (for small size
sheets).
1. Lift the lever.
2. Pull the fore-edge
trim section for-
ward.
3. Lower the lever to
lock the fore-edge
trim section.
11119
30302B1
Move the fore-edge
trim section to the line
(for normal or large
size sheets).
1. Lift the lever.
2. Push the fore-edge
trim section back-
ward.
3. Lower the lever to
lock the fore-edge
trim section.
11119
30302C1
3-3-2 Attaching Parts After
1 1
2 2
3 3
Lever
If the stitches on the booklet hit the stopper and the trim posi-
tion varies, adjust the position of the fore-edge trim section.
You can make this adjustment also when the fore-edge trim
section is at normal position (rear).
1. Lift the lever.
2. Insert the supplied socket driver as shown below and turn
the shaft to adjust the fore-edge trim section.
3. Lower the lever to lock the fore-edge trim section.
Socket driver
1 1
3 3
2 2
Lever
Changeover
11119
30302D1
1 1
3 3
2 2 2
11119
30302Q1
11119
30302E1