Overall Machine - Horizon Fitness Bookletmaker SPF-200A Manual

1-2 Machine Descriptions

1-2-2 Overall Machine

This explains how to use the system configuration including the optional IFU-200 infeed conveyor, FC-
200A/200L fore-edge trim section, and the SC-200 delivery conveyor.
Fold Section
1. The sheet is squared-up in the top-bottom and
fore-edge directions before folding. (This hap-
pens if the top and bottom guide jog function is
turned on.)
2. The sheet is pushed up by the fold knife, then is
caught in the fold roller and folded. Next the press
rollers crease the folded sheet.
Press
Rollers
Fold Rollers
21102
10202A1
Power Switch
Control Panel
Refer to 1-2-10.
Horizontal Transport
Section
The unfolded sheets are
transported through this sec-
tion.
Stitch Section
Control Panel
Stitch Section
The sheets are stapled here.
Connectors for
Downstream Device
11119
10202D1
Fold Knife
11119
10202B1
Connectors for Upstream Devices
Air Line from the Collator
Arcnet Communi-
cation Connector
Signal Connector
for Fore-edge Trim
Section
Connector for Deliv- Jog Section
ery Conveyor
The sheet is squared-up in
the top-bottom and fore-edge
direction before stitching.
Power Connector
for Fore-edge Trim
11119
11119
10202C1
10202J1
Infeed Section
The sheets are trans-
ported from this section to
the jog section.
Manual Feed Sec-
tion
The sheets can be manu-
ally fed when the stopper
opens in this section.
Optional IFU-200
Infeed Conveyor
The collated sheets are transported
from the collator to the infeed section
of the SPF-200A/200L.
Signal Connector for
IFU-200 Infeed Conveyor
Signal Connectors for Collator
Not Used
11119
10202E1
1-2-2
Overall Machine
1
3