Confirmation After Changeover - Horizon Fitness Bookletmaker SPF-200A Manual

3-3

3-3-3 Confirmation After Changeover

After the required parts are attached, the
screen shown to the right may be displayed.
- This screen shows function that have been turned
off.
- Press if the correct functions have been
turned off.
The Binding-Operation screen will be displayed.
Checking the buckle gap on the fold section
- Confirm that the guide gap is adjusted to match the
booklet thickness.
- Select from the three steps listed below:
When the thickness is
0.5 mm (0.020") or less
0.5 to 1.0 mm (0.020" to 0.039")
1.0 to 2.0 mm (0.039" to 0.079")
Adjusting the knob
1. Pull the knob forward.
2. Adjust the gap by turning the knob.
3. Push in the knob.
Operate the machine with the knob pushed in.
52
Doing a Changeover
Small
Middle
Large
Setting Confirmation Screen
21102
30303B1
Binding-Operation Screen
21102
30303C1
Middle
Small
Large
11119
30303E1
3-3-3 Confirmation After
Changeover
11119
30303D1