Jog Error Not Detected; The Sheets Are Bent - Horizon Fitness Bookletmaker SPF-200A Manual

5-5 Folding-Related Problems
5-5-3 Failed to Fold at Correct Position (Continued)
Where to Check
A piece of paper
may be left inside
the guide in the
fold section.
Buckle gap is set
correctly.

5-5-4 Jog Error Not Detected

Where to Check
The forward roller
may move away
from the sheets
while the sheets
are being jogged.

5-5-5 The Sheets Are Bent

Example of bending:
Where to Check
The transport
pusher for the
paper inserter
(Option) catches
the sheets.
Cause and Solution
- Press the Emergency Stop button, remove the
fold section cover, and lift the buckle gap adjust-
ing knob and check inside the machine.
11119
50502B1
- Uneven folding can occur if the buckle gap is
too wide, or if it is too narrow.
- Set the buckle gap correctly to match the sheet
thickness.
11119
50502C1
Cause and Solution
- When you are using thin sheets, a jog error can-
not be detected correctly because the forward
roller pushes against the edge of the sheets
while the sheets are being jogged.
- Select for the forward roller movement
on the Binding-Status Setting-Fold/Fore-edge
Trim/Conveyor screen.
11119
50504A1
11119
50504B1
Cause and Solution
- Lower the production speed.
11119
50501B1
Related
Item
5-2
3-3-3
Related
Item
5
Page 25
Related
Item
1-3-6
111