Replacing The Fore-Edge Trim Knife; Upper Knife Replacement - Horizon Fitness Bookletmaker SPF-200A Manual

6-6

Replacing the Fore-edge Trim Knife

- When replacing the knife, wear gloves
and do not touch the edge of the knife
directly. The knife is extremely sharp,
and may cause severe personal injury.
- Turn off the power switch before replac-
ing the knife.
- When the booklet thickness detector is
installed, evacuate the laser unit. Other-
wise the sensor may be damaged.

6-6-1 Upper Knife Replacement

1
When the optional booklet thick-
ness detector is installed, lift up
the laser unit.
2
Turn off the power switch.
- When replacing both the upper and lower
knives, attach the spacer by following the
steps below before turning off the power
switch.
(1) Press the Trim Knife Reverse Jog button and
lower the upper knife as far as possible.
(2) Attach the spacer.
(3) Press the Trim Knife Reverse Jog button
and raise the upper knife as far as possible.
Now press plate is raised.
3
Separate the fore-edge trim sec-
tion from the SPF.
Do not pull too hard on the cable.
WARNING
Loosen
21102
60601F1
Insert the spacers
into the second and
forth parts.
1111960601G1
Trim Knife Reverse
Jog Button
11119
60601C1
6-6-1
Upper Knife Replacement
Lift up
Loosen
Spacer
11119
60601B1
11119
60601A1
125
6